Professional ultrasonic cleaner
PRO 100SP – 40kHz, with degassing and power adjusting
Capacity – 9 liters, larger unit with degassing function, for a fast preparation of the liquid
Degassing is a function of dissolving bubbles from liquid. In cases where saving time is of essence, degas function is of immense help. Before the start of cleaning process, you can use the degas function button to prepare the liquid for optimal cleaning. This function will prepare the liquid in a few seconds.
This model is similar to PRO 100S, but with added power adjusting button. Which is welcome to everyone who has various delicate items to clean and need power adjusting before cleaning. With the separate adjustment of timer from 1 – 99 minutes, auto switch off and temperature setting of up to 80°C it is also ideal for items which need longer and thorough cleaning.
Ultrasonic frequency 40kHz provides thorough but gentle cleaning which is also appropriate for softer metals, plastics, and products with polished surfaces. The smaller bubbles which are produced at this frequency are less likely to cause surface damage and are also able to penetrate tight areas such as seams, crevices and blind holes.
Ultrasonic power of 240 W provides a high enough number of bubbles for effective and fast cleaning of various number of items in the ultrasonic cleaner.
|Ultrasonic power:||240 W|
|Number of transducers:||4|
|Timer:||1 – 99 min with auto switch-off|
|Temperature:||up to 80°C|
|Heater power:||500 W|
|Tank volume:||max. 9 lit.|
|Tank thickness:||1,5 mm|
|Basket dimensions (WxDxH):||270×220×110 mm|
|Tank dimensions (WxDxH):||300×240×150 mm|
|Unit dimensions (WxDxH):||325×270×310 mm|
|Package dimensions (WxDxH):||425×340×400 mm|
|Power plug:||Type F, 220V/50Hz|
|Net. weight:||7,2 kg|
Cleaning medical equipment, surgical and veterinary instruments, ammunition casings, PCBs, printer heads and toners dental aids, smaller industrial parts, auto, bike parts,…
Our PRO 100-300 models have stainless steel (SUS 304) tanks, which are 1-1,5 mm thick and therefore they provide for long lifetime of the ultrasonic cleaners. Seamless tank and housing prevents water leakage.
Transducers are attached to the bottom of the tank by a combination of screwing on welded threads and gluing, thus creating a homogeneous whole with the tank. This technology allows for continuous cavitation and a long life of ultrasonic cleaner.
Cleaners are equipped with industrial transducers with max. power of 60 W and frequency 40 kHz, which ensure strong power of ultrasonic effect. Ultrasonic transducers are activated by driver inside the unit which enables cleaners to work with stable ultrasonic effect and run safely.
Transducer technical specification:
|Resonant impedance (Ω)||≤15|
|Capacitance (pF)||±10%: 3500-3900|
|Diameter (mm)||45 mm|
|Height (mm)||54 mm|
Electronics for ultrasonic cleaners PRO 20-300 have been developed for the optimal operation of transducers, heating plates and easy operation of a wide range of users in mind.
PRO ASonic ultrasonic cleaners tanks have heating via MCH heating chips with heating power 100 W. There is minor difference between the real water temperature and the panel readout which is in ±1°C range.
- Use of ultrasonic cleaner without liquid is prohibited. It is dangerous and will damage the unit.
- When heating liquid always turn on ultrasound, so temperature of the liquid is evenly distributed.
- Actual volume of the tank might be less than 9 L.
- Pour liquid 2 cm below the brim with items inside.
- Do not throw objects in the tank or hit the device.
- Cleaning items should be put in cleaning basket to protect ultrasonic machine.
- Ultrasonic cleaner needs to cool down for 15 minutes after 30 minutes of ultrasonic cleaning.
- Ultrasound operation releases a certain amount of energy that heats the liquid in the tank.
Included in the package:
- Ultrasonic cleaner
- Standard basket
- Stainless steel lid
- Power cord
- User guide
Carton packing with thick foam film inside to protect the machine. Weight – 8.5 kg.